OEM BMW WHEELS

We Buy and Sell New, Used, and Reconditioned BMW Wheels

To begin shopping or researching an OEM BMW wheel, simply click 'Go' or select another automobile manufacturer below.

For wholesale wheel sales, please click here or use the drop-down below.

January 05, 2016

Wheel Backspacing and Offset

The offset of a BMW wheel is the measured distance between the backspacing and the centerline. The offset value of an OEM BMW wheel can be a positive number, a negative number, or have a value of zero. To determine the offset of a factory BMW wheel, a few steps must be taken.

First is to determine the wheels backspacing. This is done by placing the BMW wheel face down (preferably on a safe clean surface as not to damage the finish of the BMW wheel's face) and place a straightedge across the inboard flanges. Measure the distance from the mounting surface to the point where the tape measure or ruler meets the straightedge and save that number. That number is the BMW rim's backspacing.

Next, you can determine the BMW wheels centerline using the width of the wheel. Properly measuring the width of the BMW wheel requires a measurement using the distance between the inside of the inboard bead seat to the inside of the outboard bead seat. That distance divided by two results in the BMW wheels centerline measurement. Save this number as well.

The final step in determining the offset of a BMW wheel involves a small amount of math. Take the number that represented the backspacing and subtract from it the number that represented the centerline. Take that number and subtract an additional .5" (this is to compensate for the approximate .5" of inboard flange). This final number will result in a positive offset, a negative offset of a zero offset.

To convert inches to millimeters, multiply the inches by 25.4. To use the millimeter value, round the number to the nearest whole number. This is the BMW wheel's offset.